Skip to content
AI Acceleration DESIGN REFS

№ 073 / Exterior form

Gable pitch in profile

Pin the eaves to compare roof pitch without changing wall height.

IN EVERYDAY WORDS

Pin the eaves to compare roof pitch without changing wall height. Lift the ridge while the wall plates stay fixed.

The look

Both roof planes steepen around the same footprint. Keep the architectural feature in a property tour as the visual subject.

Say this to a designer

On my architectural feature in a property tour, lift the ridge while the wall plates stay fixed. Show “Low pitch” and “Steep gable”. Pin the eaves to compare roof pitch without changing wall height.

Direct the motion

These are starting points, not fixed rules. Match the timing to the content and the person using it.

trigger
The visitor controls “Ridge height” with touch, pointer or arrow keys.
entrance
Begin with the recognizable state “Low pitch” in view.
path
Both roof planes steepen around the same footprint.
timing
Follow the visitor’s input directly. For a replay, traverse the full study in about two seconds.
easing
Use linear tracking for scrubbing and a gentle ease at both ends of a timed replay.
hold
Hold “Steep gable” while the viewer inspects the result or opens the brief.
exit
Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.

The vocabulary

Ridge height
Pin the eaves to compare roof pitch without changing wall height.
Reference endpoints
“Low pitch” and “Steep gable” define the two checkable states of this effect.

Make it fit your project

Good places to use it: architectural feature in a property tour, exterior form example.

Apply this to the architectural feature in a property tour when the visitor needs to see the change from “Low pitch” to “Steep gable”.

Watch for: Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.

When motion is off: Show the two named states “Low pitch” and “Steep gable” on demand. Keep automatic movement off.

Implementation and accessibility
  1. Lift the ridge while the wall plates stay fixed.
  2. Start in “Low pitch”. Bind the control “Ridge height” to one reversible value between zero and one.
  3. Both roof planes steepen around the same footprint.
  4. Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.
  5. Inspect the two endpoints and the midpoint on a narrow touch screen. Verify the result using the keyboard.
  • Give “Ridge height” an accessible name and keyboard controls.
  • Expose the before and after descriptions as text.
  • Load the active study’s assets on demand. Stop rendering while its stage is off screen.

Give it to your AI

Download the working source and example assets. Match this reference number in the included catalog to its renderer.

Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.

Read the full prompt
Use AI Acceleration Design Ref #073 (Gable pitch in profile, version 1) on [ELEMENT] in my existing project.

Permanent reference: https://aiacceleration.ai/designrefs/073. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.

Goal: Pin the eaves to compare roof pitch without changing wall height.

DESIGN REF #073 · Gable pitch in profile

In everyday words: Pin the eaves to compare roof pitch without changing wall height. Lift the ridge while the wall plates stay fixed.

The look: Both roof planes steepen around the same footprint. Keep the architectural feature in a property tour as the visual subject.

Say this to a designer:
On my architectural feature in a property tour, lift the ridge while the wall plates stay fixed. Show “Low pitch” and “Steep gable”. Pin the eaves to compare roof pitch without changing wall height.

Motion direction (starting points to adapt):
Trigger: The visitor controls “Ridge height” with touch, pointer or arrow keys.
Entrance: Begin with the recognizable state “Low pitch” in view.
Path: Both roof planes steepen around the same footprint.
Timing: Follow the visitor’s input directly. For a replay, traverse the full study in about two seconds.
Easing: Use linear tracking for scrubbing and a gentle ease at both ends of a timed replay.
Hold: Hold “Steep gable” while the viewer inspects the result or opens the brief.
Exit: Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.

Design vocabulary:
Ridge height: Pin the eaves to compare roof pitch without changing wall height.
Reference endpoints: “Low pitch” and “Steep gable” define the two checkable states of this effect.

Reduced motion: Show the two named states “Low pitch” and “Steep gable” on demand. Keep automatic movement off.

Implement:
1. Lift the ridge while the wall plates stay fixed.
2. Start in “Low pitch”. Bind the control “Ridge height” to one reversible value between zero and one.
3. Both roof planes steepen around the same footprint.
4. Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.
5. Inspect the two endpoints and the midpoint on a narrow touch screen. Verify the result using the keyboard.

Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Show the two named states “Low pitch” and “Steep gable” on demand. Keep automatic movement off.
Accessibility: Give “Ridge height” an accessible name and keyboard controls. Expose the before and after descriptions as text.
Performance: Load the active study’s assets on demand. Stop rendering while its stage is off screen.
Avoid: Keep the architectural subject identifiable. Label the geometry and light as a conceptual study.

Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.

Permanent reference #073 · version 1. Pairs with #193, #003.

Explore all 320 references

YOUR FIELD GUIDE

Collect the ideas.

Choose the parts of a property experience you want to build. Give each one a place in your project.

My property brief (0)

Add a reference below or start with a combination.

Start with a real estate combination

320 references

Download the full catalog · Get the working source kit · Agent instructions