Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
IN EVERYDAY WORDS
Scrub the edit. Compare the two ends of the control, then replay the change.
The look
Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Say this to a designer
Apply “Cut on contact” to my property film edit. Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Direct the motion
These are starting points, not fixed rules. Match the timing to the content and the person using it.
trigger
Scroll through the study or adjust “Scrub the edit” directly.
entrance
Begin with the identifiable state “Key in flight”.
path
Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Key on the bench” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.
The vocabulary
Frame timing
The frame number fixes what the viewer sees at a particular point in the edit.
Make it fit your project
Good places to use it: property film edit.
Use this reference to recreate the change from “Key in flight” to “Key on the bench”.
Watch for: Keep the primary subject and its original meaning recognizable throughout the change.
When motion is off: Select “Key in flight” or “Key on the bench” to inspect a still state. The same control works from the keyboard.
Implementation and accessibility
Use “Scrub the edit” to move from “Key in flight” to “Key on the bench”.
Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Mount the active study on demand and release it after the visitor leaves.
Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.
Read the full prompt
Use AI Acceleration Design Ref #321 (Cut on contact, version 1) on [ELEMENT] in my existing project.
Permanent reference: https://aiacceleration.ai/designrefs/321. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.
Goal: Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
DESIGN REF #321 · Cut on contact
In everyday words: Scrub the edit. Compare the two ends of the control, then replay the change.
The look: Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Say this to a designer:
Apply “Cut on contact” to my property film edit. Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Scrub the edit” directly.
Entrance: Begin with the identifiable state “Key in flight”.
Path: Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Key on the bench” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.
Design vocabulary:
Frame timing: The frame number fixes what the viewer sees at a particular point in the edit.
Reduced motion: Select “Key in flight” or “Key on the bench” to inspect a still state. The same control works from the keyboard.
Implement:
1. Use “Scrub the edit” to move from “Key in flight” to “Key on the bench”.
2. Watch the brass key hit the bench. The left cut lands four frames early, the middle cut lands on contact, and the right cut lands four frames late.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Key in flight” or “Key on the bench” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.
Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.
Permanent reference #321 · version 1. Pairs with #004, #006.