Skip to content
AI Acceleration DESIGN REFS

№ 352 / Spatial design

Extrude the key from its outline

Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

Extrude the key from its outline · study preview

IN EVERYDAY WORDS

Raise the geometry. Compare the two ends of the control, then replay the change.

The look

Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

Say this to a designer

Apply “Extrude the key from its outline” to my dimensional illustration. Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

Direct the motion

These are starting points, not fixed rules. Match the timing to the content and the person using it.

trigger
Scroll through the study or adjust “Raise the geometry” directly.
entrance
Begin with the identifiable state “Thin outline”.
path
Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Solid edge” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.

The vocabulary

Depth cue
A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Make it fit your project

Good places to use it: dimensional illustration.

Use this reference to recreate the change from “Thin outline” to “Solid edge”.

Watch for: Keep the primary subject and its original meaning recognizable throughout the change.

When motion is off: Select “Thin outline” or “Solid edge” to inspect a still state. The same control works from the keyboard.

Implementation and accessibility
  1. Use “Raise the geometry” to move from “Thin outline” to “Solid edge”.
  2. Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.
  3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
  • Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
  • Mount the active study on demand and release it after the visitor leaves.

Give it to your AI

Download the working source and example assets. Match this reference number in the included catalog to its renderer.

Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.

Read the full prompt
Use AI Acceleration Design Ref #352 (Extrude the key from its outline, version 1) on [ELEMENT] in my existing project.

Permanent reference: https://aiacceleration.ai/designrefs/352. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.

Goal: Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

DESIGN REF #352 · Extrude the key from its outline

In everyday words: Raise the geometry. Compare the two ends of the control, then replay the change.

The look: Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

Say this to a designer:
Apply “Extrude the key from its outline” to my dimensional illustration. Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.

Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Raise the geometry” directly.
Entrance: Begin with the identifiable state “Thin outline”.
Path: Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Solid edge” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.

Design vocabulary:
Depth cue: A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Reduced motion: Select “Thin outline” or “Solid edge” to inspect a still state. The same control works from the keyboard.

Implement:
1. Use “Raise the geometry” to move from “Thin outline” to “Solid edge”.
2. Actual depth grows from a flat key silhouette. The side faces become visible at a fixed grazing angle.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.

Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Thin outline” or “Solid edge” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.

Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.

Permanent reference #352 · version 1. Pairs with #004, #006.

Explore all 500 references

YOUR FIELD GUIDE

Collect the ideas.

Choose the parts of a property experience you want to build. Give each one a place in your project.

My property brief (0)

Add a reference below or start with a combination.

Start with a real estate combination

500 references

Download the full catalog · Get the working source kit · Agent instructions