From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
IN EVERYDAY WORDS
Pan between targets. Compare the two ends of the control, then replay the change.
The look
From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Say this to a designer
Apply “Whip from lamp to key” to my tour transition. From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Direct the motion
These are starting points, not fixed rules. Match the timing to the content and the person using it.
trigger
Scroll through the study or adjust “Pan between targets” directly.
entrance
Begin with the identifiable state “Lamp centered”.
path
From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Key centered” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.
The vocabulary
Camera continuity
A landmark or a direction of travel connects two different views.
Make it fit your project
Good places to use it: tour transition.
Use this reference to recreate the change from “Lamp centered” to “Key centered”.
Watch for: Keep the primary subject and its original meaning recognizable throughout the change.
When motion is off: Select “Lamp centered” or “Key centered” to inspect a still state. The same control works from the keyboard.
Implementation and accessibility
Use “Pan between targets” to move from “Lamp centered” to “Key centered”.
From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Mount the active study on demand and release it after the visitor leaves.
Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.
Read the full prompt
Use AI Acceleration Design Ref #359 (Whip from lamp to key, version 1) on [ELEMENT] in my existing project.
Permanent reference: https://aiacceleration.ai/designrefs/359. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.
Goal: From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
DESIGN REF #359 · Whip from lamp to key
In everyday words: Pan between targets. Compare the two ends of the control, then replay the change.
The look: From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Say this to a designer:
Apply “Whip from lamp to key” to my tour transition. From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Pan between targets” directly.
Entrance: Begin with the identifiable state “Lamp centered”.
Path: From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Key centered” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.
Design vocabulary:
Camera continuity: A landmark or a direction of travel connects two different views.
Reduced motion: Select “Lamp centered” or “Key centered” to inspect a still state. The same control works from the keyboard.
Implement:
1. Use “Pan between targets” to move from “Lamp centered” to “Key centered”.
2. From one camera position, a fast turn shifts the frame between two clearly separated workbench objects, followed by a hold.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Lamp centered” or “Key centered” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.
Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.
Permanent reference #359 · version 1. Pairs with #004, #006.