Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
IN EVERYDAY WORDS
Close the gap. Compare the two ends of the control, then replay the change.
The look
Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Say this to a designer
Apply “Bring two blocks into contact” to my dimensional illustration. Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Direct the motion
These are starting points, not fixed rules. Match the timing to the content and the person using it.
trigger
Scroll through the study or adjust “Close the gap” directly.
entrance
Begin with the identifiable state “Separated blocks”.
path
Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Touching blocks” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.
The vocabulary
Depth cue
A visible difference in size, coverage, lighting or movement describes the space between surfaces.
Make it fit your project
Good places to use it: dimensional illustration.
Use this reference to recreate the change from “Separated blocks” to “Touching blocks”.
Watch for: Keep the primary subject and its original meaning recognizable throughout the change.
When motion is off: Select “Separated blocks” or “Touching blocks” to inspect a still state. The same control works from the keyboard.
Implementation and accessibility
Use “Close the gap” to move from “Separated blocks” to “Touching blocks”.
Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Mount the active study on demand and release it after the visitor leaves.
Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.
Read the full prompt
Use AI Acceleration Design Ref #384 (Bring two blocks into contact, version 1) on [ELEMENT] in my existing project.
Permanent reference: https://aiacceleration.ai/designrefs/384. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.
Goal: Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
DESIGN REF #384 · Bring two blocks into contact
In everyday words: Close the gap. Compare the two ends of the control, then replay the change.
The look: Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Say this to a designer:
Apply “Bring two blocks into contact” to my dimensional illustration. Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Close the gap” directly.
Entrance: Begin with the identifiable state “Separated blocks”.
Path: Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Touching blocks” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.
Design vocabulary:
Depth cue: A visible difference in size, coverage, lighting or movement describes the space between surfaces.
Reduced motion: Select “Separated blocks” or “Touching blocks” to inspect a still state. The same control works from the keyboard.
Implement:
1. Use “Close the gap” to move from “Separated blocks” to “Touching blocks”.
2. Two solid samples approach each other. The sliver of background between their facing surfaces disappears at contact.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Separated blocks” or “Touching blocks” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.
Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.
Permanent reference #384 · version 1. Pairs with #004, #006.