Skip to content
AI Acceleration DESIGN REFS

№ 392 / Spatial design

Open a hollow shell

Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

Open a hollow shell · study preview

IN EVERYDAY WORDS

Separate the halves. Compare the two ends of the control, then replay the change.

The look

Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

Say this to a designer

Apply “Open a hollow shell” to my dimensional illustration. Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

Direct the motion

These are starting points, not fixed rules. Match the timing to the content and the person using it.

trigger
Scroll through the study or adjust “Separate the halves” directly.
entrance
Begin with the identifiable state “Closed shell”.
path
Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Inside surfaces” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.

The vocabulary

Depth cue
A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Make it fit your project

Good places to use it: dimensional illustration.

Use this reference to recreate the change from “Closed shell” to “Inside surfaces”.

Watch for: Keep the primary subject and its original meaning recognizable throughout the change.

When motion is off: Select “Closed shell” or “Inside surfaces” to inspect a still state. The same control works from the keyboard.

Implementation and accessibility
  1. Use “Separate the halves” to move from “Closed shell” to “Inside surfaces”.
  2. Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.
  3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
  • Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
  • Mount the active study on demand and release it after the visitor leaves.

Give it to your AI

Download the working source and example assets. Match this reference number in the included catalog to its renderer.

Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.

Read the full prompt
Use AI Acceleration Design Ref #392 (Open a hollow shell, version 1) on [ELEMENT] in my existing project.

Permanent reference: https://aiacceleration.ai/designrefs/392. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.

Goal: Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

DESIGN REF #392 · Open a hollow shell

In everyday words: Separate the halves. Compare the two ends of the control, then replay the change.

The look: Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

Say this to a designer:
Apply “Open a hollow shell” to my dimensional illustration. Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.

Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Separate the halves” directly.
Entrance: Begin with the identifiable state “Closed shell”.
Path: Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Inside surfaces” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.

Design vocabulary:
Depth cue: A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Reduced motion: Select “Closed shell” or “Inside surfaces” to inspect a still state. The same control works from the keyboard.

Implement:
1. Use “Separate the halves” to move from “Closed shell” to “Inside surfaces”.
2. Two halves of a housing separate around the same centerline, exposing the smaller part enclosed inside.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.

Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Closed shell” or “Inside surfaces” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.

Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.

Permanent reference #392 · version 1. Pairs with #004, #006.

Explore all 500 references

YOUR FIELD GUIDE

Collect the ideas.

Choose the parts of a property experience you want to build. Give each one a place in your project.

My property brief (0)

Add a reference below or start with a combination.

Start with a real estate combination

500 references

Download the full catalog · Get the working source kit · Agent instructions