Skip to content
AI Acceleration DESIGN REFS

№ 436 / Object motion

Take slack out of a cord

The low curve straightens first. The attached weight moves only after the cord becomes taut.

Take slack out of a cord · study preview

IN EVERYDAY WORDS

Pull the cord. Compare the two ends of the control, then replay the change.

The look

The low curve straightens first. The attached weight moves only after the cord becomes taut.

Say this to a designer

Apply “Take slack out of a cord” to my interactive workbench. The low curve straightens first. The attached weight moves only after the cord becomes taut.

Direct the motion

These are starting points, not fixed rules. Match the timing to the content and the person using it.

trigger
Scroll through the study or adjust “Pull the cord” directly.
entrance
Begin with the identifiable state “Cord sagging”.
path
The low curve straightens first. The attached weight moves only after the cord becomes taut.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Load moves” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.

The vocabulary

Motion constraint
An attachment, path or force limits how a moving part can travel.

Make it fit your project

Good places to use it: interactive workbench.

Use this reference to recreate the change from “Cord sagging” to “Load moves”.

Watch for: Keep the primary subject and its original meaning recognizable throughout the change.

When motion is off: Select “Cord sagging” or “Load moves” to inspect a still state. The same control works from the keyboard.

Implementation and accessibility
  1. Use “Pull the cord” to move from “Cord sagging” to “Load moves”.
  2. The low curve straightens first. The attached weight moves only after the cord becomes taut.
  3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
  • Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
  • Mount the active study on demand and release it after the visitor leaves.

Give it to your AI

Download the working source and example assets. Match this reference number in the included catalog to its renderer.

Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.

Read the full prompt
Use AI Acceleration Design Ref #436 (Take slack out of a cord, version 1) on [ELEMENT] in my existing project.

Permanent reference: https://aiacceleration.ai/designrefs/436. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.

Goal: The low curve straightens first. The attached weight moves only after the cord becomes taut.

DESIGN REF #436 · Take slack out of a cord

In everyday words: Pull the cord. Compare the two ends of the control, then replay the change.

The look: The low curve straightens first. The attached weight moves only after the cord becomes taut.

Say this to a designer:
Apply “Take slack out of a cord” to my interactive workbench. The low curve straightens first. The attached weight moves only after the cord becomes taut.

Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Pull the cord” directly.
Entrance: Begin with the identifiable state “Cord sagging”.
Path: The low curve straightens first. The attached weight moves only after the cord becomes taut.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Load moves” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.

Design vocabulary:
Motion constraint: An attachment, path or force limits how a moving part can travel.

Reduced motion: Select “Cord sagging” or “Load moves” to inspect a still state. The same control works from the keyboard.

Implement:
1. Use “Pull the cord” to move from “Cord sagging” to “Load moves”.
2. The low curve straightens first. The attached weight moves only after the cord becomes taut.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.

Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Cord sagging” or “Load moves” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.

Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.

Permanent reference #436 · version 1. Pairs with #004, #006.

Explore all 500 references

YOUR FIELD GUIDE

Collect the ideas.

Choose the parts of a property experience you want to build. Give each one a place in your project.

My property brief (0)

Add a reference below or start with a combination.

Start with a real estate combination

500 references

Download the full catalog · Get the working source kit · Agent instructions