Skip to content
AI Acceleration DESIGN REFS

№ 472 / Spatial design

Separate front and rear silhouettes

A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

Separate front and rear silhouettes · study preview

IN EVERYDAY WORDS

Shift the camera. Compare the two ends of the control, then replay the change.

The look

A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

Say this to a designer

Apply “Separate front and rear silhouettes” to my dimensional illustration. A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

Direct the motion

These are starting points, not fixed rules. Match the timing to the content and the person using it.

trigger
Scroll through the study or adjust “Shift the camera” directly.
entrance
Begin with the identifiable state “Overlapping shapes”.
path
A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Separated shapes” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.

The vocabulary

Depth cue
A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Make it fit your project

Good places to use it: dimensional illustration.

Use this reference to recreate the change from “Overlapping shapes” to “Separated shapes”.

Watch for: Keep the primary subject and its original meaning recognizable throughout the change.

When motion is off: Select “Overlapping shapes” or “Separated shapes” to inspect a still state. The same control works from the keyboard.

Implementation and accessibility
  1. Use “Shift the camera” to move from “Overlapping shapes” to “Separated shapes”.
  2. A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.
  3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
  • Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
  • Mount the active study on demand and release it after the visitor leaves.

Give it to your AI

Download the working source and example assets. Match this reference number in the included catalog to its renderer.

Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.

Read the full prompt
Use AI Acceleration Design Ref #472 (Separate front and rear silhouettes, version 1) on [ELEMENT] in my existing project.

Permanent reference: https://aiacceleration.ai/designrefs/472. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.

Goal: A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

DESIGN REF #472 · Separate front and rear silhouettes

In everyday words: Shift the camera. Compare the two ends of the control, then replay the change.

The look: A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

Say this to a designer:
Apply “Separate front and rear silhouettes” to my dimensional illustration. A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.

Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Shift the camera” directly.
Entrance: Begin with the identifiable state “Overlapping shapes”.
Path: A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Separated shapes” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.

Design vocabulary:
Depth cue: A visible difference in size, coverage, lighting or movement describes the space between surfaces.

Reduced motion: Select “Overlapping shapes” or “Separated shapes” to inspect a still state. The same control works from the keyboard.

Implement:
1. Use “Shift the camera” to move from “Overlapping shapes” to “Separated shapes”.
2. A close brass disc and a distant blue disc of different sizes initially overlap, then separate with sideways camera travel.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.

Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Overlapping shapes” or “Separated shapes” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.

Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.

Permanent reference #472 · version 1. Pairs with #004, #006.

Explore all 500 references

YOUR FIELD GUIDE

Collect the ideas.

Choose the parts of a property experience you want to build. Give each one a place in your project.

My property brief (0)

Add a reference below or start with a combination.

Start with a real estate combination

500 references

Download the full catalog · Get the working source kit · Agent instructions