A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
IN EVERYDAY WORDS
Press the stamp. Compare the two ends of the control, then replay the change.
The look
A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Say this to a designer
Apply “Press a seal into a soft surface” to my dimensional illustration. A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Direct the motion
These are starting points, not fixed rules. Match the timing to the content and the person using it.
trigger
Scroll through the study or adjust “Press the stamp” directly.
entrance
Begin with the identifiable state “Flat surface”.
path
A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
timing
Scrub to inspect the change, then use replay to see the sequence in time.
easing
Match the illustrated motion. Keep manual seeking directly coupled to the control.
hold
Hold the resolved state “Imprint in the mesh” long enough to inspect its defining detail.
exit
Carry the subject into the next exhibit and keep the saved project selection.
The vocabulary
Depth cue
A visible difference in size, coverage, lighting or movement describes the space between surfaces.
Make it fit your project
Good places to use it: dimensional illustration.
Use this reference to recreate the change from “Flat surface” to “Imprint in the mesh”.
Watch for: Keep the primary subject and its original meaning recognizable throughout the change.
When motion is off: Select “Flat surface” or “Imprint in the mesh” to inspect a still state. The same control works from the keyboard.
Implementation and accessibility
Use “Press the stamp” to move from “Flat surface” to “Imprint in the mesh”.
A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Mount the active study on demand and release it after the visitor leaves.
Replace [ELEMENT] with the part of your project you want to change. The prompt includes the design brief, motion direction, definitions, and implementation steps.
Read the full prompt
Use AI Acceleration Design Ref #484 (Press a seal into a soft surface, version 1) on [ELEMENT] in my existing project.
Permanent reference: https://aiacceleration.ai/designrefs/484. This local brief contains the full definition. Inspect my existing stack, component, design tokens and interaction before editing.
Goal: A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
DESIGN REF #484 · Press a seal into a soft surface
In everyday words: Press the stamp. Compare the two ends of the control, then replay the change.
The look: A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Say this to a designer:
Apply “Press a seal into a soft surface” to my dimensional illustration. A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Motion direction (starting points to adapt):
Trigger: Scroll through the study or adjust “Press the stamp” directly.
Entrance: Begin with the identifiable state “Flat surface”.
Path: A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
Timing: Scrub to inspect the change, then use replay to see the sequence in time.
Easing: Match the illustrated motion. Keep manual seeking directly coupled to the control.
Hold: Hold the resolved state “Imprint in the mesh” long enough to inspect its defining detail.
Exit: Carry the subject into the next exhibit and keep the saved project selection.
Design vocabulary:
Depth cue: A visible difference in size, coverage, lighting or movement describes the space between surfaces.
Reduced motion: Select “Flat surface” or “Imprint in the mesh” to inspect a still state. The same control works from the keyboard.
Implement:
1. Use “Press the stamp” to move from “Flat surface” to “Imprint in the mesh”.
2. A stamp descends into a subdivided surface. It rises again while the displaced vertices retain the depression.
3. Check the beginning, midpoint and end at phone size. Replay the result and reverse the control.
Adapt the reference to my branding and content. Preserve existing functionality and semantic HTML.
Reduced motion: Select “Flat surface” or “Imprint in the mesh” to inspect a still state. The same control works from the keyboard.
Accessibility: Give the control a persistent name. Provide both endpoint descriptions and a keyboard equivalent.
Performance: Mount the active study on demand and release it after the visitor leaves.
Avoid: Keep the primary subject and its original meaning recognizable throughout the change.
Show me the working result, verify keyboard, mobile, loading/error and reduced-motion behavior, and explain any tradeoff. Do not publish or change unrelated elements.
Permanent reference #484 · version 1. Pairs with #004, #006.